http://www.tracopower.com page 1 of 3 dc/dc converters tme series, 1 watt features single-in-line package (sip) i/o isolation 1000 vdc high effciency up to 80% operating temperature C40c to +85c industry standard pinout 100% burn-in (8 h) lead free design, rohs compliant 3-year product warranty the tme series is a range of sub-miniature, isolated dc/dc-converters in a sip- package, which requires only 0.7 cm2 of board space. they provide a cost effective solution to generate supplementary, isolated voltages. full smd-design and a 100% production test of parameters ensure a high reliability of this product. ordercode input voltage output voltage output current max. effciency typ. tme 0303s 3.3 vdc 260 ma 74 % tme 0305s 3.3 vdc 10% 5.0 vdc 200 ma 77 % tme 0503s 3.3 vdc 260 ma 72 % tme 0505s 5 vdc 200 ma 70 % tme 0509s 5 vdc 10% 9 vdc 110 ma 76 % tme 0512s 12 vdc 80 ma 77 % tme 0515s 15 vdc 65 ma 78 % tme 1205s 5 vdc 200 ma 71 % tme 1209s 9 vdc 110 ma 77 % tme 1212s 12 vdc 10% 12 vdc 80 ma 79 % tme 1215s 15 vdc 65 ma 80 % tme 2405s 5 vdc 200 ma 70 % tme 2409s 9 vdc 110 ma 76 % tme 2412s 24 vdc 10% 12 vdc 80 ma 79 % tme 2415s 15 vdc 65 ma 79 % models
http://www.tracopower.com page 2 of 3 all specifcations valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. input specifications input current no load /full load 3.3 vin models: 35 ma / 370 ma typ. 5 vin models: 30 ma / 260 ma typ. 12 vin models: 13 ma / 110 ma typ. 24 vin models: 7 ma / 55 ma typ. surge voltage (1 sec. max.) 3.3 vin models: 6 v max. 5 vin models: 9 v max. 12 vin models: 1 v max. 24 vin models: 30 v max. reverse voltage protection 0.3 a max. reflected input ripple current can be reduced by ext. 1C3.3 f polyester film capacitor input filter internal capacitors output specifications voltage set accuracy 3 % regulation C input variation 1.2 % / 1 % change vin C load variation 20 C 100 % 10 % max. ripple and noise (20 mhz bandwidth) 150 mv p-p max. temperature coefficient 0.02 %/k short circuit protection limited 1 sec. max. capacitive load 33 f max. general specifications temperature ranges C operating C40c to +5c C case temperature +95c max. C storage C40c to +105c humidity (non condensing) 95 % rel h max. reliability, calculated mttf (mil-hdbk-217f, @+25c ground benign) 2000000 h isolation voltage (60 sec.) input/output 1000 vdc isolation capacity input/output 60 pf typ. isolation resistance input/output 1000 mohm switching frequency 90 hz typ. (frequency modulation) frequency change over line and load 30 % max. dc/dc converters tme series 1 watt
page 3 of 3 j enatschstrasse 1 ch-8002 zurich switzerland t el. +41 43 311 45 11 fax +41 43 311 45 45 info@traco.ch www .tracopower .com physical specifications casing material non conductive black plastic (l 94-v0 rated) package weight 3.3 / 5.0 / 12 vin models 1.3 g (0.05 o) 24 vin models 1. g (0.0 o) soldering temperature max. 25c / 10 sec. outline dimensions mm (inches) bottom view 2.54 11.5 (0.45) 2 1 0.5 1.9 2.54 34 6.1 ( 0.24) 24 v models 4.2 (0.17) 5.2 (0.2) 7. 1 (0.28) 0 .25 (0.01) 0.5 (0.02) 3. 2 (0. 13) 0.5 (0.02) 2.54 1. 8 10.2 (0.4) (0.02) 0.5 (0.02) (0.1) (0.1) (0.1) (0.08 0.02 ) (0.07) 0.5 tolerances 0.25 (0.01) pin pich tolerance 0.13 (0.005) pins 0.05 (0.002) pin single 1 Cvin (gd) 2 +vin (vcc) 3 Cvout 4 +vout pin-out dc/dc converters tme series 1 watt rev. 0/10 specifcations can be changed any time without notice.
|